Sharing a Front Test with Your Guild Using !sendfront in Lords Mobile: Coordinated Rally Setup

A failed rally is often not caused by troop count, but by sharing information too late. The target may have dropped shield, have its leader inside, or appear to be wearing defensive gear; but starting a rally before the front strength is clear can force your guild into unnecessary speed-ups and troop losses. On the other hand, a front test performed at the right time determines the rally leader’s composition, filler participation, and the timing of the second move.

In LordsRally, !sendfront supports pre-attack decision-making by running a front test on a target with 4 armies. The real difference is not that only one person sees the result; it is that everyone reads it in the same battle language and turns it into an actionable plan in the guild group. Thanks to the bot working in a WhatsApp or Telegram group, R4/R5, the rally leader, and active members can access the same data quickly. Instead of debating, “Should we open a rally?” you can plan, “Which leader, which formation, and within how many minutes?”

Why is a front test critical for rally decisions?

A front test is a pre-check layer used to make more direct decisions about a target’s defensive structure. Especially against opponents with high might, frequent teleports, or last-second gear swaps, looking only at might is not enough. An 800M might castle may be sitting with a nearly empty garrison, while another castle at 350M might can become a more expensive target than expected because of proper troop distribution and defensive gear.

Use the data from !sendfront to answer these three questions:

• Is the target suitable for one rally or consecutive pressure? If resistance looks high in the first test, preparing a second leader may be safer than spending all speed-ups in a single move.
• Which formation should you use? By reading the test result together with !comp, you can choose a more sensible attack setup against the enemy’s troop weight.
• How long is the rally window open? The target may become active, teleport, or ask their guild for help after the shield drops. That is why the timestamp matters as much as the test result.

The goal is not to treat a front test as a “guaranteed win.” In Lords Mobile warfare, leader gear, research, familiars, garrison, reinforcements, and instant defense changes all affect the result. A front test does not eliminate risk completely, but it moves the rally decision away from guesswork and toward a measured evaluation.

The 90-second coordination flow before a rally

Successful guilds do not lose test results in long message chains. They use a pre-defined, short sharing format. Before starting !sendfront, the R4 or rally leader confirms the target identity and battle window; when the test is complete, they turn the result into one message the team can act on.

You can set up a practical flow like this:

• 0–15 seconds: Confirm the target with !find. The guild tag, activity status, location, might, and shield information verify that everyone is looking at the same target.
• 15–30 seconds: Check why the target is open. Was the shield recently dropped? Is the castle burning? Is rage active? Has the leader just returned? These details change the likelihood that the opponent is online.
• 30–60 seconds: Start the 4-army front test with !sendfront. Meanwhile, begin preparing the rally leader candidate and the filler call.
• 60–90 seconds: Share the test, check formations with !comp, and give a clear order: leader, target coordinates, attack type, filler priority, and departure time.

For example, a structured message from an R4 in the guild group could follow this logic: “Target confirmed, no shield. Front test complete; it looks suitable for the first rally. Leader A is opening, infantry-heavy fillers have priority. Keep a second leader ready; if the target teleports, confirm the new location from the bot card.” This gives players an actionable role assignment without making them wait to interpret raw test data.

Because the target card’s location and status can change, confirm again immediately before launch. In war-focused guilds, it is normal for a target to teleport into the hive or apply a shield within a minute.

Do not read !sendfront alone: combine it with three data sources

A front test is a valuable starting point, but coordinated rallies need three additional checks: the target card, formation review, and live event alerts.

First, confirm the target with !find. The player may have changed name, changed guild, or teleported. LordsRally helps relocate a fleeing castle through automatic location tracking based on its unique identity; even so, you must make sure the team is looking at the current target before the rally starts. You can see all search, tracking, and war commands on the commands page.

Second, use !comp to evaluate the army formations from the front test. A test that looks “hard” does not automatically mean canceling; with the right leader and counter formation, the target may still be playable. In the opposite case, even if the test looks easy, there may be a reinforcement hive or many camps around the target. That is why adding tile and camp commands to your war routine is a sensible move for checking the immediate area.

The third check is live events. LordsRally’s event-driven architecture delivers alerts to the group when an event occurs, without waiting for fixed-interval polling. Critical movements such as shield drops, active attacks, rage, migrations, and rally alerts are usually delivered within 1–3 seconds. If another guild’s rally lands on the target while the front test is in progress, or if the target applies a shield, update the plan immediately instead of following the old one.

Make role assignments clear in your WhatsApp and Telegram group

The biggest mistake when sharing a front test is having everyone try to make the decision at once. Even if information arrives fast, the rally is delayed without a command chain. Set at least four roles within the group:

• R4/R5 coordinator: Sets target priority, gives final approval for the rally, and stops unnecessary attacks.
• Test operator: Starts !sendfront, shares the result in a structured format, and rechecks the target’s location.
• Rally leader: Prepares leader gear and the attack setup based on the test and !comp evaluation.
• Filler caller: Announces who should join, which troops are needed, and the launch time in a short message.

On WhatsApp, interactive buttons such as Info, Gear, and Track on player cards can speed up additional checks with one tap. If buttons are unavailable, the bot safely falls back to a numbered list, so the workflow does not stop during war. Telegram groups also create a shared battle intelligence screen for your team through the same war intelligence and command logic.

This setup is especially important for war guilds playing in multiple kingdoms. LordsRally supports multiple kingdoms; by organizing a separate group for each kingdom, you can keep KvK preparation in Kingdom A separate from the daily hunting flow in Kingdom B. This reduces the risk of searching for a target in the wrong kingdom or sending a rally order to the wrong channel.

How should you time a front test after a shield-drop alert?

A shield-drop notification is not a direct order to “rally immediately,” but it is one of the most valuable attack windows. If the shield has just dropped, the opponent may not have returned to the game yet, may be out gathering resources, or may simply have forgotten protection. On the other hand, a high-might player, especially in an active guild, may switch into defense within a few minutes.

For this reason, split targets into three categories:

• Low response risk: A target that has been idle for a long time, is outside the hive, or shows no defensive movement. A quick !sendfront and single-rally plan can be considered.
• Medium response risk: A target with activity signs but no strong nearby support. Run the front test and keep a second leader ready.
• High response risk: A strong war guild, a player with rage active, a hive position, or dense camps nearby. Even if the test result looks good, you need a defensive plan for possible counter rallies and reinforcements.

During nighttime hours, do not act based on the “no shield” filter alone. Review the targets listed by !unshielded through their activity and guild context. Shield, might, and activity filters help reduce notification load according to your guild’s attack criteria. You can enable or disable alert types one by one and prioritize the critical ones for your rally team among 12 smart alerts. For broader use cases, review the features page.

Turn test results into guild memory

A coordinated rally is not only about catching today’s target; it is also about reading enemy guilds’ defensive habits over time. If you have run tests against multiple targets from the same guild, adding short notes reduces decision time in future wars.

For example, guild notes can include insights like these:

• “This guild gathers reinforcements in the first 2 minutes after a shield drop.”
• “Members outside the hive teleport quickly; the first rally window is short.”
• “Their rally leaders respond quickly to defensive calls; prepare a second wave.”

In LordsRally, you can save a guild note with !addguildnote and a personal note with !addnote. These notes preserve the operational lesson you draw from the test result, not just the raw result itself. This means every new R4 does not need to learn from zero against the same opponent.

LordsRally’s 78 commands bring target search, war, migration, tiles, kingdom, and Wonder War intelligence into one operational flow. The front test is an important part of that flow, but it delivers the most value when combined with correct target confirmation, live rally alerts, and clear guild communication. For more battle routines, check the guides in the blog.

Frequently Asked Questions

Does !sendfront start a rally directly?

No. !sendfront is used to run a front test with 4 armies. Opening the rally, choosing the leader, calling troops, and deciding the launch are handled by the guild’s R4/R5 and rally leader. The test helps make that decision more informed.

Who should share the front test result with the guild?

The healthiest approach is having a pre-assigned test operator share it. However, the message should end with a clear operational order from R4/R5: Is there an attack, who is the leader, which troops are required, and is a second wave waiting? If raw data is left on its own, different interpretations reduce rally speed.

What should we do if the target teleports or applies a shield?

Confirm the target again before sending a rally to the old coordinates. LordsRally’s automatic location tracking helps relocate a castle that teleports and changes its name through its unique identity. If a shield is active, stop the attack; keep the group ready for a new shield-drop notification or another suitable target.

To build a faster, more organized rally flow, review the war commands on the commands page, evaluate notification options through features, and start building your guild’s own battle procedure today.